Click here to download product highlight sheet

Click here to download brochure

TECHNOLOGIES

CERTIFIED HEPA FILTRATION: HEPA filter with 80 ft2 of media removes airborne dust, allergens, particulate and mold with hospital grade efficiency. All filters are individually certified to guarantee 99.99% efficiency at .3 microns, and they are mechanically sealed within the cabinet to prevent air bypass, allowing EZ AIR which operate at HEPA efficiency.

ACTIVATED CARBON: 3 ½ lbs. of carbon and zeolite are incorporated into the Carbon Prefilter Pack to adsorb harmful odors, chemicals, and gases, and it removes larger dust and allergens to protect the more expensive HEPA filter. The Prefilter Packs are designed for regular replacement (as you would change the prefilter in any air cleaner to protect the HEPA); but in doing so fresh carbon is continually being used so the unit’s odor adsorption ability is maximized. Every EZ AIR comes with a year’s supply of Carbon Prefilter Packs (10 ½ lbs.)

UNIQUE ATTRIBUTES

INDEPENDENT HEPA AND CARBON FILTERS: The carbon and HEPA are separate filters in EZ AIR because carbon typically saturates much more quickly than a HEPA filter becomes clogged. Even if larger amounts of carbon were used in a HEPA filter, carbon filters will usually saturate within at least a year, if not sooner. Carbon acts like a sponge in adsorbing odors, chemicals and gases, and once the carbon saturates is can actually outgas trapped odors, so fresh carbon should be used at all times. And by having separate carbon and HEPA filters, consumers will not need to pay to replace both the HEPA and carbon when only the carbon needs be replaced, greatly reducing maintenance costs for the life of the air cleaner.

AIRFLOW PATTERN: The key to any air cleaner is the airflow pattern that it creates. A device can utilize the best air cleaning technology in the world, but if the dirty air is not drawn into the unit from throughout the room and replaced with clean disinfected air, then the device’s overall effectiveness and efficiency is limited. The airflow pattern created by EZ AIR is designed to produce an excellent mixing factor and clean all parts of the room. Dirty air is drawn in through the top of the unit through three intake vents. This allows for the most efficient removal of contaminated air from the normal breathing zone (3-6 feet high), as the dirty air has easy and direct access to the unit’s air intake. Air then passes through the four stages of filtration before being exhausted out of the lower portion of the unit from three sides to all parts of the room. Unlike some air cleaners that unsuccessfully try to maneuver dirty air from the room via clean air exhaust, EZ AIR actively and aggressively removes or “vacuums” dirty air from the normal breathing zone.

EASE AND AFFORDABILITY OF MAINTENANCE: All replacement parts are easily accessed via a single back panel that is held in place with four nylon knurl screws. NO TOOLS ARE REQUIRED FOR ANY NORMAL UNIT MAINTENANCE. And EZ AIR’s replacement costs are up to one half less than its nearest competitors.

VARIABLE SPEED: EZ AIR utilizes a full variable speed control, so it can be set on a virtually any speed up to 350 cfm. This allows the customer to balance air flow against any air noise that is suitable for their taste

INDICATOR LIGHTS: Monitor and inform customers when HEPA filter needs to be replaced.